Occasionally, the bamboo wainscotting might not be as long as we would like. In this case, we need to stick two pieces together, however, a small gap might pop up in between them. This bamboo wall panels stile offers an elegant solution to this problem. Its required cutting and applying is identical to that of the edge trims:

Applying the wall panels stile to our bamboo wall is fairly easy, it is achievable with glue or smaller nails, but even screws are usable. We just need to watch the level and saw the wall panels stile to the required size. Use a saw with small teeth for the latter.

We have several options for fixing. It can be glued, nailed, or even fixed with small dowels and screws.

Gluing: D2 wood industry glue works. When gluing, it is worth fixing with an extra nail every 50 - 70 cm. You will need glue, hammer, nails.

Nailing: Fix the skirting board to the wall with small nails every 50-70 cm. Needed: hammer, nail. 

Dowel and screw: In order to achieve a nice result, it is worth marking the location of the holes in the middle of the slat (15 mm) every 70-80 cm. If you have one, you can make the holes with a centered wooden drill bit. Fit the slat in place, then mark the location of the holes on the wall. All that's left is to drill. Put the dowels in place and you can proceed with screwing the joint. Needed: dowel, screw, measuring device, hammer, screwdriver, drill.

An exotic bamboo wainscotting can achieve some serious home improvements, but should you need more than one piece of it, this bamboo wall panels stile provides the addition you need to have an exotic yet homely bamboo decor with easy assembly in your home.

You might have searched for: decorative wall panels, wainscoting, beadboard panels, beadboard, wainscot panelling