Getting our bamboo wall panels up on the wall is one thing, but to achieve a truly elegant result, we will need to have its edges hemmed. By effectively framing the wainscotting with such wall panels trims, we also prevent it from loosening and coming off, aside from the aforementioned aesthetics.
Applying the wainscot cap is fairly easy, it is achievable with glue or smaller nails, but even screws are usable. We just need to watch the level and saw the wall cladding trim to the required size. Use a saw with small teeth for the latter.
We have several options for fixing. It can be glued, nailed, or even fixed with small dowels and screws.
Gluing: D2 wood industry glue works. When gluing, it is worth fixing with an extra nail every 50 - 70 cm. You will need glue, hammer, nails.
Nailing: Fix the skirting board to the wall with small nails every 50-70 cm. Needed: hammer, nail.
Dowel and screw: In order to achieve a nice result, it is worth marking the location of the holes in the middle of the slat (15 mm) every 70-80 cm. If you have one, you can make the holes with a centered wooden drill bit. Fit the slat in place, then mark the location of the holes on the wall. All that's left is to drill. Put the dowels in place and you can proceed with screwing the joint. Needed: dowel, screw, measuring device, hammer, screwdriver, drill.
An exotic bamboo wainscotting can achieve some serious house improvement, but it can use some proper wall panels trims to achieve its full potential in beauty.
You might have searched for: wood slat wall panels UK, bamboo panelling UK, wood slat wall panels UK, bamboo cladding UK, bamboo panels UK
- Method of use