If you plan to refurbish furniture, you can save a lot of time if you use prefabricated carved wood ornaments. Our present decorative wood mouldings, the RK-656-s, are decorative stuccos made of exotic wood embellished with floral and shell patterns. Furniture restorers can use such a carved wood panel in many ways: these victorian moldings can become imposing vertical ornaments when renovating an old window, or they can also be used as cabinet decorations, even on a door front, as central elements. You have also found what you were looking for if you need decorative wood panels for walls!
How does the application of the carvings take place?
Surface preparation is key during restoration! First of all, the furniture should be disassembled. In this way, all workpieces are easier to access later.
If you decide on a complete renovation, it is worth sanding the entire surface of the object down to the wood. First with coarser and then increasingly finer grit sanding tools. For quick and less tiring work, we recommend the use of eccentric sanders or vibrating sanders. There will probably be some details left on the surface that can only be solved by manual sanding. In this case, it is worth purchasing a high-quality sanding cloth and sanding sponge.
Even in the case of furniture decoration, it is worthwhile to sponge all the details of the product. In this way, small errors left over from production can be easily removed.
Gluing can follow: Fortunately, this work phase does not require many tools either. All you need is wood glue (D2, D3) and weights or a clamp.
Apply glue thinly but evenly to both surfaces. After that, we position the carving in the desired place. Press down while drying. Carefully wipe off the small drops of adhesive that appear as a result of rubbing with a slightly damp cloth. Although the glue dries transparent, it is difficult to remove once it hardens. Also, the paint and varnish may not stay on the material, so the coverage will not be complete.
Although many people are afraid of it, this work phase is not complicated either. After choosing the right raw materials, only care and dexterity are required. The use of paintable, varnish, oil and varnish can also bring beautiful results.
However, for passionate amateurs, we recommend the combination of glaze and satin lacquer. When using these, you only have to pay attention to apply them in a nice, thin, even layer on the surface. To achieve the desired effect, it is worth working in 2-3 thin layers.
You might have searched for this as: angel ornaments UK, wooden ornaments UK, wood ornaments UK, wooden flowers UK, wood carving UK, carving wood UK
- Carvings by shape
- Elongated ornaments
- Ornament height
- 5,1 - 10 cm
10,1 - 20 cm
- Ornament width
- 10,1 - 20 cm
20,1 - 40 cm