Open weave rattan caning in 50cm width
This rattan caning product is available both as rattan roll and by the meter. Whether for furniture restoration, making new furniture, or entryway panels, we highly recommend this product. For example, an attractive radiator cover, rattan room divider, door inlay, or a unique lampshade can be made from it. Take a look at our selection of rattan rolls!
Technical data of TH-1/2-50-S rattan webbing
Material: rattan (from the outer bark of the rattan palm). Pattern: octagonal, density of 2 holes per inch. Width: 50 cm, with weaving strands extending at least 2 cm beyond the nominal width on both sides. Roll length: 15.24 m (50 feet). Quality: S (superior), suitable strength for chair caning. This product is available both by the meter and as a whole rattan roll.
IMPORTANT: How to soak rattan webbing?
It is recommended to soak S superior quality material in water for 15-30 minutes to make it easier to use. This way the material softens, making it easier to work with and it slightly stretches. It is important NOT to soak it in regular tap water, as this can cause the rattan fabric to discolor. Instead, use DISTILLED water or DEIONIZED water. This method prevents discoloration of the material during soaking. After drying, the material returns to its original size.
What material is rattan rolls made of?
Rattan is a natural material, extracted from the outer bark of rattan palm native to Southeast Asian tropics. It is both environmentally friendly and easily renewable, as the palm grows rapidly. Fabrics made from rattan are strong and flexible, making them ideal for furniture making. The weaving pattern for this product is octagonal. The open structure has several functions. It has a light and elegant appearance, providing good ventilation, which is especially practical for a radiator cover. Buy a whole rattan roll and get 10% off the price!
Thonet chair caning: Important facts in brief.
What does thonet chair restoration mean?
In thonet chair restoration, the damaged rattan sheets must be completely replaced; repairing strand by strand is not possible. This means first removing the damaged material from the chair, then soaking the new rattan panels, and finally fixing it into the frame. The goal of thonet chair restoration is to return the chair to its original condition.
What tools and equipment are needed for thonet chair restoration?
For restoration, you will definitely need a sharp utility knife, scissors, wood glue, and a special caning wedge. The removal of the chair caning can be done using a chisel and pliers or with a router. Proper tools are essential for the safe completion of the process and accurate results.
What are the uses of rattan chair canings?
Rattan is an extremely versatile material, used for restoring furniture and creating new products. Its excellent load-bearing capacity makes it ideal for chair caning on seating surfaces. However, it is not only suitable for repairing chairs; it can also be used for radiator covers, rattan room divider UK, and door inlays. Due to its open structure, rattan webbing is ideal for making radiator covers, as it does not block the heat, ensuring efficient heating while providing a decorative solution. It also functions well as a rattan room divider UK, as its lightweight material allows spaces to be sectioned easily and quickly. As a door inlay, it is a great choice and fits well in cabinets, dressers, and small furniture.
What is a Ceska chair covered with rattan caning and how is it repaired?
Marcel Breuer's work is a milestone of 20th-century modernism, and the Marcel Breuer cesca chair is part of this legacy. Thanks to its practical and clean design, the Marcel Breuer cesca chair has become a symbol of functionality. Bauhaus philosophies are reflected in the details of this chair. During restoration of Marcel Breuer cesca chairs with rattan caning, the first step is to assess the condition of the caning. The damaged rattan panels UK must be completely replaced; repairing strand by strand is not recommended. After removing the old thonet chair caning, the next task is to repair and then polish the wooden parts. Afterwards, the new rattan material UK is placed in the refurbished wooden frame.
How to redo the rattan caning of a groove-fitted thonet chair?
Restoring a thonet chair means replacing the damaged or worn rattan sheets. The rattan webbing should be soaked before use, so the material softens and stretches slightly, making it easier to tension and fit into the groove. Restoration requires a sharp utility knife, scissors, wood glue, a special caning wedge, a small chisel or router. For fastening the caning into grooves, a special wedge-shaped peddig cane is used; this product is also available in our webshop. The complete drying time between the wooden frame and glued rattan caning is generally 24 hours. Until the glue sets completely in the groove, keep the rattan fabric moist by covering it with a damp cloth. As the rattan sheet dries, it shrinks, becoming tighter and more durable. Apply paraffin oil to the back of the installed thonet chair caning every 1-2 years. This keeps the material flexible and prevents it from breaking.
Can rattan webbing be painted or stained?
Yes, but it is not easy. Rattan webbing roll UK does not absorb paint or stain easily. For best results, use dye mixed into shellac or Beisen lacquer. Solvent-based lacquers are recommended over water-based ones, as water-based lacquers may cause the material to stretch. Always test your finishing on a small piece first!
This product may also be known as: rattan cane suppliers uk.
